Frameless Ground Led 1

Description


  • Linear inground recessed waterproof led luminaire
  • frameless/trimless (without external trim)
  • suitable for outdoors use
  • body made from extruded aluminum polyester powder coated
  • ground base made from extruded aluminum polyester powder coated
  • with die cast aluminum end caps polyester powder coated
  • with heavy duty front frosted/opal polycarbonate diffuser/cover
  • with 4.5mm thickness
  • upon request available with tempered opal/mat glass
  • with rubber gaskets and stainless-steel screws
  • with one or two cable glands IP68
  • with pre-connected male and female IP68 fis fast connection
  • with incorporated high-power smd waterproof led strip IP66
  • adjusted on a high performance linear heatsink
  • for best thermal management of led source
  • CRI80 | available in 2700-3000-4000 Kelvin
  • upon request available in 6500 Kelvin
  • input voltage 24volt DC as standard
  • works with external/remote constant voltage led driver
  • standard lenght of luminaire 1000mm
  • available also in 500mm-1500mm-2000mm length
  • upon request available in different lenghts

Code - Lighting Source


24261
  • LED STRIP

    4.6w/meter | 24v DC | 2700-3000-4000 KELVIN | 590-620-655 LUMEN/meter

IP 67  
24262
  • LED STRIP

    7.6w/meter | 24v DC | 2700-3000-4000 KELVIN | 850-900-950 LUMEN/meter

IP 67  
24263
  • LED STRIP

    11.5w/meter | 24v DC | 2700-3000-4000 KELVIN | 1370-1445-1520 LUMEN/meter

IP 67  
24264
  • LED STRIP

    14.4w/meter | 24v DC | 2700-3000-4000 KELVIN | 1600-1700-1800 LUMEN/meter

IP 67  
24265
  • LED STRIP

    6.4w/meter | 24v DC | 2700-3000-4000 KELVIN | 805-850-890 LUMEN/meter

IP 67  
24266
  • LED STRIP

    10.0w/meter | 24v DC | 2700-3000-4000 KELVIN | 1100-1150-1200 LUMEN/meter

IP 67  
24267
  • LED STRIP

    20.0w/meter | 24v DC | 2700-3000-4000 KELVIN | 2100-2200-2300 LUMEN/meter

IP 67  

Extra Information


  • SOME CHEMICAL SUBSTANCIES, LIQUIDS OR VAPOUR, MAY CAUSE CORROSION/
  • DAMAGES ON METAL PARTS OF THE FITTINGS.
  • VERIFY THE PRESENCE OF THESE SUBSTANCIES WHEN INSTALLING THE
  • PRODUCTS AND THE COMPATIBILITY WITH SUCH SUBSTANCIES.
  • STAINLESS STEEL SURFACES COULD BE DAMAGED BY: SODIUM HYDROXIDE(SODA), LIQUID CHLORINE OR VAPOUR, HYDROCHLORIC ACID, NITRIC ACID (20%),SULPHURIC ACID (30%).
  • DIE-CAST ALUMINIUM COULD BE DAMAGED BY: ARSENIC ACID (20%), ACETIC ACID,HYDROCHLORIC ACID, FORMIC ACID, NITRIC ACID (20%), SULPHURIC ACID (30%),
  • QUICKLIME, SODIUM HYDROXIDE (SODA).
  • SUGGESTION: VERY IMPORTANT IS TO REGULARLY CLEAN THE FITTING SURFACES.
  • AT LEAST ONCE A YEAR OR DURING BULB REPLACEMENT.
  • CLEANING COULD BE MADE WITH DILUTED SOAP OR DETERGENT. IN ANY CASE DO NOT USE SOLVENT OR ETHYLENE BASE PRODUCTS.

WARNING: in all ground lighting fittings installation, at least a20 cm depth drain hole filled by gravel must be made to prevent flooding

Upon request the above lighting fitting can be produced in longer lenghts


LED technology changes constantly forward, so before selecting / ordering the most suitable product for you, ask for a confirmation that this is the most updated product to our list

warm 2700 Kelvin | warm white 3000 Kelvin | neutral white 4000 Kelvin

Colors


  • 18
    SILVER
Painted with Polyester Electrostatic Powder
  • 1
    WHITE
  • 2
    BLACK
  • 30
    SILVER TEXTURE

Request Data


You will receive extra information for current product